6403 and 6404 Bearing Sizes: Heavy Series Specs Guide
In the heavy 6400 series, the 6403 bearing measures 17 mm bore by 62 mm outer diameter by 17 mm width, while the 6404 measures 20 mm bore by 72 mm outer diameter by 19 mm width. Knowing exact 6403 and 6404 bearing sizes is critical for maintenance technicians, plant engineers, and procurement staff selecting industrial spare parts across Indonesia.
These heavy series deep groove ball bearings offer larger envelope dimensions and thicker cross-sections than standard 6200 or 6300 series options[1]. Consequently, they accommodate significantly higher radial and axial loads in demanding industrial machinery such as heavy gearboxes, industrial pumps, and mining equipment[1][2].
However, selecting the correct replacement component requires more than matching basic physical envelope dimensions. Matching bearing dimensions alone does not ensure interchangeability, as open, 2RS rubber sealed, and ZZ shielded variants serve distinct operational and environmental requirements[3][4].
What are the exact dimensions of 6403 and 6404 bearings?
In the heavy 6400 series, the 6403 bearing measures 17 mm bore by 62 mm outer diameter by 17 mm width, while the 6404 measures 20 mm bore by 72 mm outer diameter by 19 mm width. Both components belong to the heavy-section metric deep groove ball bearing family, designed to support higher radial and axial loads than lighter series[1].
Heavy-series deep groove ball bearings offer larger envelope dimensions to accommodate heavier radial and axial loads compared to standard series[1][5]. For example, while a standard 20 mm bore bearing in the 6200 series measures 47 mm in outer diameter, the 6404 expands the outer diameter to 72 mm and width to 19 mm to handle heavy industrial stresses[5].
| Part Number | Bore (d) | Outer Diameter (D) | Width (B) | Series |
|---|---|---|---|---|
| 6403 bearing | 17 mm | 62 mm | 17 mm | 6400 Series |
| 6404 bearing | 20 mm | 72 mm | 19 mm | 6400 Series |
When servicing machinery in industrial centers like Cikarang, Surabaya, or Medan, verifying these exact boundary dimensions prevents improper housing fit and premature failure[5]. Choosing the right size ensures that the shaft and housing envelope can support required load limits without unexpected structural interference.
Parts in this article
| Part (bore x OD x width) | Variants | Price |
|---|---|---|
| 6403 17 x 62 x 17 mm 6400 Series | 6403 (Open) 6403 2RS (2x Rubber Seal) 6403 ZZ (2x Shield) | Ask today's price on WhatsApp |
| 6404 20 x 72 x 19 mm 6400 Series | 6404 2RS (2x Rubber Seal) 6404 ZZ (2x Shield) | Ask today's price on WhatsApp |
What variants are available for 6403 and 6404 deep groove bearings?
The 6403 bearing is available in Open, 2RS rubber seal, and ZZ metal shield variants, while the 6404 bearing is available in 2RS rubber seal and ZZ metal shield variants. Matching bearing dimensions alone does not ensure interchangeability, as open, 2RS rubber sealed, and ZZ shielded variants serve distinct operational and environmental requirements[3][4].
HI-TEC SILVER supplies the 6403 in Open, 2RS, and ZZ variants, whereas the 6404 is supplied in 2RS and ZZ variants under both HI-TEC and HI-TEC SILVER brands. Choosing between the value-focused HI-TEC line and the premium HI-TEC SILVER tier allows purchasing managers and workshop mechanics across Jakarta, Bandung, and Semarang to match component service life to machine requirements.
| Selection Criteria | Open Variant | ZZ Shielded (2x Shield) | 2RS Sealed (2x Rubber Seal) |
|---|---|---|---|
| Sealing Mechanism | None (open raceways) | Non-contact metal shields[3] | Contact rubber seals[3][4] |
| Contamination Protection | Low (requires external housing seal)[3] | Moderate (blocks coarse dust)[3][6] | High (excludes fine dust & moisture)[3][4] |
| Friction & Speed Limits | Lowest friction, highest speed[3] | Low drag, near open-bearing speed[3][7] | Higher drag, lower maximum speed[3][8] |
| Relubrication | Relubricable via housing[3] | Factory-greased, low maintenance[3] | Factory-greased, maintenance-free[3] |
| Common Industrial Uses | Enclosed oil-bath gearboxes | Clean factory machinery | Exposed pumps & agricultural equipment |
Open variants feature no integral seals, making them suitable for enclosed gearboxes lubricated by oil[3]. Non-contact ZZ metal shields prevent larger debris from entering while generating minimal friction, making them effective in relatively clean factory environments[3][6]. In contrast, 2RS contact rubber seals protect raceways from dust, humidity, and washdown fluids, making them the preferred choice for agricultural and processing equipment subject to severe contamination[3][4].
Need a price? Ask HI-TEC Asia on WhatsApp Send the part number (6403, 6404, or any other) to ask for today's price and availability. Open WhatsApp |
Frequently Asked Questions
What are the exact dimensions of 6403 and 6404 bearings?
The 6403 bearing features a 17 mm bore, 62 mm outer diameter, and 17 mm width. The 6404 bearing features a 20 mm bore, 72 mm outer diameter, and 19 mm width. Both belong to the heavy 6400 series.
What variants are available for 6403 and 6404 deep groove bearings?
The 6403 is available in Open, 2RS rubber sealed, and ZZ metal shielded variants under the HI-TEC SILVER brand. The 6404 is available in 2RS rubber sealed and ZZ metal shielded variants under both HI-TEC and HI-TEC SILVER brands.
Are all bearings with the same size dimensions interchangeable?
No, dimensional match alone does not guarantee interchangeability. Open, ZZ metal shielded, and 2RS contact rubber sealed variants have different friction levels, speed ratings, and resistance to dust or moisture, so the variant must match your operating environment.
References
- TIMKEN® DEEP GROOVE BALL BEARINGS. https://www.timken.com/resources/10857_deep-groove-ball-brgs-catalog/ (2026-11-04)
- SKF | 6409 | Cylindrical Bore Deep Groove Ball Bearing - Applied. https://www.applied.com/c-brands/c-skf-corp/c-skf/6409/Cylindrical-Bore-Deep-Groove-Ball-Bearing/p/100756521 (2024-11-01)
- Bearing Seal Type Selector: Open, Shielded or Sealed. https://www.fuli-bearings.com/tools/open-zz-2rs-seal-selector/ (2026-10-26)
- How to Choose Bearing ZZ, 2RS, Open, and C3? Complete Guide to Seals .... https://iskbearing.com/news/knowledge/bearing-zz-2rs-open-c3-selection-guide (2026-05-25)
- 6400 Series - Single Row Deep Groove Ball Bearings. https://www.pti.eu/pdf/lejer/singlerowball/6400.pdf (2026-09-05)
- ZZ vs 2 RS Sealing Options. https://cpsconveyors.com.au/news/zz-vs-2-rs-sealing-options/ (2026-03-27)
- ZZ vs 2RS Bearings: Which Seal to Write on Your Order. https://www.fuli-bearings.com/blog/zz-vs-2rs-bearing-seals/ (2026-10-23)
- 6400 Series Deep Groove Ball Bearings | USA ROLLER CHAIN. https://usarollerchain.com/collections/6400-series-ball-bearings-s-6478 (2026-10-16)