• Daftar
  • Masuk


6202 and 6203 Bearing Sizes: Dimensions & ZZ vs 2RS Guide

6202 and 6203 Bearing Sizes: Dimensions & ZZ vs 2RS Guide

The primary difference between 6202 and 6203 bearing sizes comes down to their internal bore, outside diameter, and width. A 6202 bearing features a 15 mm bore, a 35 mm outside diameter, and an 11 mm width, while a 6203 bearing features a 17 mm bore, a 40 mm outside diameter, and a 12 mm width[1][2]. Both belong to the popular 6200 light-series single-row deep groove ball bearing family, but their physical dimensional differences make them non-interchangeable on machinery shafts.

Selecting the correct replacement for workshop equipment, electric motors, or industrial machinery across Indonesia requires looking beyond the series number alone. Choosing between a 2RS contact rubber seal and a ZZ steel shield dictates how well your equipment tolerates dust, moisture, and high rotational speeds.

Whether maintaining factory machinery in Cikarang or servicing electric motors in Surabaya, matching exact physical dimensions and enclosure options ensures reliable operation with minimal downtime.

What are the exact dimensions of 6202 and 6203 bearings?

The 6202 bearing measures 15 mm bore, 35 mm outside diameter, and 11 mm width, while the 6203 bearing measures 17 mm bore, 40 mm outside diameter, and 12 mm width[1][2]. Bearings within the 6200 series are not interchangeable by series number alone, as size differences and 2RS rubber seals versus ZZ metal shields dictate specific operating environments.

Even though both components are classified under the 6200 series, attempting to fit a 6203 bearing onto a 15 mm shaft will cause immediate fitment failure. The 6203 provides a 2 mm larger bore, 5 mm larger outer diameter, and 1 mm greater width, allowing it to support higher basic dynamic load ratings[1][3]. Shaft seats and housing bores must be machined to match these exact physical envelopes.

Part Number Bore (d) Outside Diameter (D) Width (B) Series Family
6202 15 mm 35 mm 11 mm 6200 Light Series
6203 17 mm 40 mm 12 mm 6200 Light Series

When evaluating parts for equipment overhauls, ordering by exact size and part number avoids costly installation delays. Mechanics and engineers can verify exact specifications directly on the 6202 bearing catalog listing before starting maintenance work. For larger shaft requirements, comparing options like the 6205 vs 6305 bearing provides helpful context on shaft sizing steps.

Parts in this article

Part (bore x OD x width)VariantsPrice
6202
15 x 35 x 11 mm
6200 Series
6202 2RS (2x Rubber Seal)
6202 ZZ (2x Shield)
Ask today's price on WhatsApp
6203
17 x 40 x 12 mm
6200 Series
6203 ZZ (2x Shield)Ask today's price on WhatsApp
6205
25 x 52 x 15 mm
6200 Series
6205 2RS E (2x Rubber Seal)
6205 ZZ (2x Shield)
Ask today's price on WhatsApp
6305
25 x 62 x 17 mm
6300 Series
6305 2RS (2x Rubber Seal)
6305 2RS E (2x Rubber Seal)
6305 ZZ (2x Shield)
Ask today's price on WhatsApp

What is the difference between 2RS rubber seals and ZZ metal shields?

The main difference between 2RS rubber seals and ZZ metal shields lies in contamination protection and rotational friction. A 2RS variant uses synthetic rubber seals that physically contact the inner ring to keep out dust and moisture, whereas a ZZ variant uses non-contact metal shields that generate less friction at higher speeds[3]. HI-TEC SILVER supplies the 6202 in 2RS (2x Rubber Seal) and ZZ (2x Shield) variants and the 6203 in ZZ, with live price and availability details accessible via WhatsApp at +62 823-1004-6527.

Variant selection depends on operating conditions - 2RS rubber seals provide superior moisture protection while ZZ metal shields minimize friction in cleaner settings[3]. Selecting the proper enclosure extends service life in demanding industrial environments across Jakarta and Bandung.

Feature / Condition 2RS (Rubber Seals) ZZ (Metal Shields)
Contact Design Dual contact rubber lips Dual non-contact steel plates
Dust & Water Protection Superior barrier against dust and moisture[3] Moderate protection against coarse debris
Rotational Friction Higher seal torque[4] Lower friction torque[3]
Typical Application Dusty workshops, washdown areas Clean electric motors, sealed gearboxes

Upgrading to premium tiers such as HI-TEC SILVER ensures high-quality material selection and longer service life for severe-duty applications. Plant managers evaluating maintenance strategies can consult our HI-TEC vs HI-TEC SILVER bearings guide or explore our full industrial bearing range to choose the best configuration for their machinery.

Need a price? Ask HI-TEC Asia on WhatsApp

Send the part number (6202, 6203, 6205, or any other) to ask for today's price and availability.

Open WhatsApp

Frequently Asked Questions

What are the exact dimensions of 6202 and 6203 bearings?

The 6202 bearing has a 15 mm bore, 35 mm outside diameter, and 11 mm width. The 6203 bearing features a 17 mm bore, 40 mm outside diameter, and 12 mm width.

What is the difference between 2RS rubber seals and ZZ metal shields on 6202 bearings?

2RS rubber seals physically contact the inner ring to block dust, dirt, and water splash, making them ideal for harsh environments. ZZ metal shields use non-contact steel plates to minimize friction, making them suited for cleaner, high-speed applications.

Are 6202 and 6203 bearings interchangeable?

No, 6202 and 6203 bearings are not interchangeable. The 6203 has a larger bore (17 mm vs 15 mm), outer diameter (40 mm vs 35 mm), and width (12 mm vs 11 mm), requiring different shaft and housing dimensions.

How do I check availability for HI-TEC SILVER 6202 and 6203 bearings on WhatsApp?

You can contact HI-TEC directly on WhatsApp at +62 823-1004-6527 to receive instant information regarding current availability and price quotes for HI-TEC SILVER 6202 and 6203 bearings.

References

  1. Industrial Motor Bearings. https://www.nskeurope.com/content/dam/nsk/common/catalogs/ctrgPdf/bearings/e1289c.pdf (2026-09-15)
  2. INDUSTRIAL MOTOR BEARINGS. https://www.nsk.com/content/dam/nsk/am/en_us/documents/bearings-americas/Industrial-Motor-Bearings.pdf (2026-11-05)
  3. 6203 Series. https://www.nsk.com/engineering/6203-dgbb-sr.html (2024-11-05)
  4. MAEDLER deep groove ball bearing single row inner diameter .... https://maedlernorthamerica.com/partshop/maedler-deep-groove-ball-bearing-single-row-inner-diameter-15mm-outer-diameter-35mm-width-11mm-sealed-on-both-sides-pn-6202-2rs-mae/ (2026-11-06)